Shandong LvShun Automotive Seat Co., Ltd.
Introduction to the maintenance of construction machinery seats
Jan 10,2024
1. Frequently use a vacuum cleaner to remove dust from the seats to keep the surface clean;
2. Do not place sharp objects or hard objects on the seats to prevent scratches that affect the appearance.
3. Keep the car ventilated. Too dry or wet will accelerate the aging of the leather;
4. When there is no one in the car, close the windows or park in a cool place to prevent direct sunlight from damaging the leather.
5. In summer, people sweat a lot, and the pores of the leather will absorb sweat. High temperature and humidity will cause the organic matter in the sweat to react chemically with the leather, which is prone to odor. Use a wet and dry rag to wipe frequently.
6. When wiping the seat, do not use alkaline cleaning fluid, because the leather is treated with acid during leather making, and alkalinity will reduce the softness of the leather, and wrinkles will occur after long-term use. Try to use diluted soapy water or special leather surface cleaners, which can be bought in large supermarkets.
7. Use soft materials when wiping and use light force. 8. Apply water-based wax regularly to protect the leather. The second is the cleaning and maintenance of the fabric seats of construction machinery. Fabrics are easy to hide dirt, so you usually need to buy a seat cushion, which makes cleaning simple. There are mainly the following points: 1. Use a vacuum cleaner to suck out the dirt on the seat regularly. 2. Do not eat in the car, and do not let the fine food residue fall on the seat to prevent the breeding of mites or other microorganisms and produce strange smells, which are difficult to clean. 3. Try not to touch sharp objects such as knives, scissors, and needles, otherwise you need to repair them if they are scratched. Although the repair cost is low, it is more troublesome. 4. When cleaning, you can use a long-bristled brush to brush out the dirt in places that are not too dirty, and then use a vacuum cleaner to suck out the dirt. 5. For particularly dirty areas, you can use a brush to clean them, then use a clean rag dipped in a small amount of neutral detergent to wipe the seat surface in a semi-dry and semi-wet state, and then use a vacuum cleaner to clean the seat again and remove excess moisture.
6. If dust condenses on the flannel or is difficult to remove with a vacuum cleaner, first brush it with a soft brush and then vacuum it.
7. Use a dry cloth to wipe the fiber surface, then dry the seat fiber completely. If the flannel is still dirty, wipe it with mild soapy water and warm water, and then dry it completely.
8. If the dirt cannot be removed, you can try a fiber cleaner. Use this cleaner according to the instructions. Use this cleaner first in less obvious places to make sure it does not have a negative effect on the flannel.
Contact Us
Tel：86-150-6652-0003
WhatsAPP：+86-188-6605-6528
Postcode: 253400
Email: Yizeseat@duwowl.cn
Address: Shandong Province, Ningjin County, Shandong Province, East New District, Leiting Road, Zeyi car seats
Share to
